Pellet boiler
TOBY
20-50 KW
Class 5 ECO DESIGN Fully automatic pellet boiler.
Energy label: A+
Benefits:
TOBY-L 20-50 kW
- Automatic ignition/extinguishing
- Easy and quick solution for cleaning the heat exchanger
- Wide power modulation
- Large pellet storage capacity (200-330 dm3 depending on the model)
- Durable construction
- Unique burner design
- Possibility to connect a room thermostat
- Energy efficiency class A+
- Class 5 certificate (20 kW and 30 kW models)
Our boilers in detail
Specifications of TOBY-L 20-50 kW
The boiler “TERMOMONT TOBY” is a time-tested product of the factory “TERMOMONT DOO” sold in many European countries, having recommended itself as a simple, durable, large fuel capacity, easy to maintain and inexpensive product.
The burner of the boiler “TERMOMONT TOBY” is made of cast iron, which gives confidence to buyers not to doubt the durability and durability of the product. Thanks to the large fuel capacity, the boiler can operate for up to 10 days (depending on the thermal resistance and square footage of the house).
The heat exchanger cleaning device of the boiler “TERMOMONT TOBY” allows you to clean the boiler’s heat exchanger in 1 minute by moving a special handle, and clean the ash with the help of an ash pump. Thus, 5-10 minutes per week will be enough to clean the boiler.
The ignition and extinguishing processes are fully automated.
A smooth combustion process is ensured by a time-tested controller, which itself assesses: the calorific value and humidity of the pellets, monitors the oxygen content, forcibly regulates the pressure in the combustion chamber and other parameters. This optimizes the combustion process, selects a power modulation algorithm that automatically reduces the amount of pellets supplied when the difference between the set and achieved boiler temperatures decreases. The controller of the TERMOMONT TOBY boiler fully controls the amount of air in the combustion chamber: this ensures optimal combustion regardless of the quality of the pellets.
The operating principle of this boiler is based on the “subpressure” of the combustion chamber. The design of the Termomont TOBY boiler is sealed, and the pressure in the combustion chamber is maintained by fans and a pressure sensor. The boiler constantly maintains the appropriate pressure forcibly, so it does not matter what the chimney design is, what the chimney condition is, and what the weather conditions are.
The diameter of the chimney is only 12 cm, which significantly reduces the cost and time of installing the chimney, and you can use the money saved for other needs (e.g. buying pellets).
Default version of the product comes with the premium touch-screen display
Pellets are fed from the tank to the boiler using an internal conveyor. From there, the pellets are fed into the combustion chamber, where they freely fall into the boiler burner (this avoids pellet feeding problems). For safety, the pellet tank and the combustion zone are physically separated, and a safety thermostat is installed to protect against pellet ignition in the tank. There is also a pressure sensor inside the combustion chamber – when the boiler door is opened, this sensor will react and stop the pellet feeding process.
This provides the highest level of electronic protection and control of the combustion process.
The combustion chamber of the TERMOMONT TOBY boiler is made of 5 mm thick special boiler steel (265 GH grade) which is heat-resistant.
When operated properly, boiler maintenance is minimal.
Boiler warranty terms available here.
Important: the ash pump is not included in the boiler package!!!






| TYPE | TOBY 20 | TOBY 30 | TOBY 40 | TOBY 50 |
|---|---|---|---|---|
| Nominal power | 24,7 kW | 31,7 kW | 40 kW | 50 kW |
| Power range | 5 – 24.7 kW | 9.5 – 31,7 kW | 13 – 39,9 kW | 16 – 50 kW |
| Width (mm) | 974 | 1144 | 1194 | 1194 |
| Height (mm) | 1385 | 1485 | 1535 | 1585 |
| Lenght (mm) | 694 | 694 | 724 | 804 |
| Flue gas exit height (mm) | 975 | 975 | 1125 | 1175 |
| Flow / Return (inch) | 1“ | 5/4“ | 5/4“ | 5/4“ |
| Weight (kg) | 298 | 338 | 398 | 470 |
| Pellet storage capacity (kg) | 120 | 150 | 180 | 200 |
| Flue gas opening (mm) | ø120 | ø120 | ø120 | ø120 |
| Air inlet (mm) | ø50 | ø50 | ø50 | ø50 |
| Water volume (lit) | 62 lit | 80 lit | 98 lit | 114 lit |
| Flue gas exit temperature | <160 ºC | <160 ºC | <160 ºC | <160 ºC |
| Maximum working pressure | 3 bar | 3 bar | 3 bar | 3 bar |
| Energy consumption during start-up | 400 W | 400 W | 400 W | 400 W |
| Energy consumption at steady-state | 100 W | 100 W | 100 W | 100 W |
| Electrical network | 220V 50 Hz | 220V 50 Hz | 220V 50Hz | 220V 50Hz |
| Boiler efficiency | >90 % | >90 % | >90 % | >90 % |
