kitchen boilers

TEMY PRO

12-18 KW

A compact size kitchen-boiler
Energy label: A

Benefits:

TEMY PRO 12-18 kW

Additional advantages to the TEMY PRO solid fuel kitchen boiler:

Our boilers in detail

Specifications of TEMY PRO 12-18 kW

This product is aimed for living areas. It’s a solid fuel boiler device with no thermal insulation coat. Upper surface can be used for preparing food. Product dimensions make it suitable for placement in small areas.

TEMY PRO stove-boiler is made according to EN 303-5 and fulfills Ecodesign criteria 2015:1189.

This product can be placed into living area used as a residential space heater only if the safety requirements defined by EN 12809:2006 are fully respected.

This product can only be fed and fired with dry firewood logs with relative humidity smaller than 12% and calorific value equal or greater than 15 MJ/kg.

Boiler chamber is entirely made of steel, while the frame parts of the upper plate are made of stainless steel AISI 314. The door frames are made of cast-iron. The upper door is filled with fireproof glass, while the lower door is made of steel.

The flue opening is placed on the upper side. There is an alternative on the lateral side of the boiler, so the customer can choose which one to use and which one to close.

Hot-water volume inside the boiler is high (up to 65 l) – this fact guarantees functionality of the product as a central heating boiler. It has no insulation coating around, so that the heat radiation is also transmitted in a smaller amount to the surrounding area.

TYPE	TEMY PRO 12	TEMY PRO 18
Nominal power	12 kW	18 kW
Power transmitted to the central heating	9 kW	13 kW
Power range (min-max)	4-12 kW	6-18 kW
Width	710 mm	710 mm
Height	810 mm	960 mm
Lenght	700 mm	770 mm
Weight	191 kg	218 kg
Flow / Return (inch)	1“	1“
Fill / Drain tap (inch)	½”	½”
Flue gas opening	ø118 mm	ø128 mm
Boiler water volume	31 lit	40 lit
Upper door size	258 x 196 mm	258 x 196 mm
Lower door size	258 x 196 mm	258 x 196 mm