Pellet boiler
B-Smart
15-30 KW
Class 5 ECO DESIGN pellet boiler, the strong device with smart regulation.
Energy label: A+
Benefits:
B–SMART 15-30 kW
Additional advantages to the B-SMART pellet heating system:
- Automatic cleaning of the heat exchanger
- Automatic burner cleaning
- The boiler is equipped with: circulation pump, safety valve and expansion vessel
- Automatic ignition/extinguishment
- High power modulation amplitude
- Large fuel capacity (150-230 dm3 depending on the model)
- Long-lasting construction
- Patented burner design
- Energy efficiency class A+
- Class 5 certificate
Our boilers in detail
Specifications of B-Smart 15-30 kW
The B-SMART boiler is the latest product of the TERMOMONT DOO factory, created according to the latest technologies, combining today’s market trends and consumer expectations.
The original design of the rotating burner is patented and registered in the European Union EUIPO.
The efficiency of this boiler exceeds 91%, and the exhaust gas temperature is very low.
It is a class 5 boiler according to the EN 303-5 standard and a “7-star” boiler according to the French “Flamme Verte” classification.
The boiler “Termomont B-Smart” is equipped with automatic cleaning of the heat exchanger, automatic cleaning of the burner, automatic ignition and extinguishing. Therefore, the maintenance of the boiler is minimal, and you will clean the ash with the help of an ash pump. So, only 5-10 minutes a week will be enough to pump the ash.
The principle of operation of this boiler is based on the “underpressure” of the combustion chamber. The construction of the Termomont B-Smart boiler is sealed, and the pressure in the combustion chamber is maintained by fans and a pressure sensor. The boiler is constantly forced to maintain the correct pressure, so it does not matter what the construction of the chimney is, what is the condition of the chimney and what are the weather conditions.
The smooth combustion process is ensured by the latest generation automation with the PID algorithm, which itself evaluates: the calorific value and humidity of the pellets, monitors the oxygen content, forcibly regulates the pressure in the combustion chamber and other parameters. This way, the combustion process is optimized, a power modulation algorithm is selected, which automatically reduces the amount of supplied pellets, when the difference between the set and reached boiler temperature decreases. The boiler controller fully controls the amount of air in the combustion chamber: thus ensuring an optimal combustion process regardless of the quality of the granules.
The boiler “Termomont TOBY B” is factory- installed with a circulation pump, an expansion tank and a safety valve. The diameter of the chimney is only 800mm/120mm (see technical data), so you will significantly reduce the costs and time of installing the boiler and chimney, and you can spend the money saved on other needs (e.g. buying pellets).
Pellets are supplied from the tank to the boiler with the help of an internal transporter. From there, the pellets are fed into the combustion chamber, where they fall freely into the burner of the boiler (thus avoiding pellet feeding problems). For safety, the pellet tank and the combustion zone are physically separated, and a safety thermostat is installed to prevent the pellets from igniting in the tank. There is also a pressure sensor inside the combustion chamber – when the boiler door is opened, this sensor will react and stop the pellet feeding process. This ensures the highest level of electronic protection and control of the combustion process.
The combustion chamber of the boiler is made of 5 mm thick special boiler steel (265 GH brand) which is resistant to heat.
With proper operation, boiler maintenance is minimal.
Important: the ash pump is not included with the boiler!!!
The original design of the rotating burner is patented and registered in the European Union EUIPO.
The efficiency of this boiler exceeds 91%, and the exhaust gas temperature is very low.
It is a class 5 boiler according to the EN 303-5 standard and a “7-star” boiler according to the French “Flamme Verte” classification.
The boiler “Termomont B-Smart” is equipped with automatic cleaning of the heat exchanger, automatic cleaning of the burner, automatic ignition and extinguishing. Therefore, the maintenance of the boiler is minimal, and you will clean the ash with the help of an ash pump. So, only 5-10 minutes a week will be enough to pump the ash.
The principle of operation of this boiler is based on the “underpressure” of the combustion chamber. The construction of the Termomont B-Smart boiler is sealed, and the pressure in the combustion chamber is maintained by fans and a pressure sensor. The boiler is constantly forced to maintain the correct pressure, so it does not matter what the construction of the chimney is, what is the condition of the chimney and what are the weather conditions.
The smooth combustion process is ensured by the latest generation automation with the PID algorithm, which itself evaluates: the calorific value and humidity of the pellets, monitors the oxygen content, forcibly regulates the pressure in the combustion chamber and other parameters. This way, the combustion process is optimized, a power modulation algorithm is selected, which automatically reduces the amount of supplied pellets, when the difference between the set and reached boiler temperature decreases. The boiler controller fully controls the amount of air in the combustion chamber: thus ensuring an optimal combustion process regardless of the quality of the granules.
The boiler “Termomont TOBY B” is factory- installed with a circulation pump, an expansion tank and a safety valve. The diameter of the chimney is only 800mm/120mm (see technical data), so you will significantly reduce the costs and time of installing the boiler and chimney, and you can spend the money saved on other needs (e.g. buying pellets).
Pellets are supplied from the tank to the boiler with the help of an internal transporter. From there, the pellets are fed into the combustion chamber, where they fall freely into the burner of the boiler (thus avoiding pellet feeding problems). For safety, the pellet tank and the combustion zone are physically separated, and a safety thermostat is installed to prevent the pellets from igniting in the tank. There is also a pressure sensor inside the combustion chamber – when the boiler door is opened, this sensor will react and stop the pellet feeding process. This ensures the highest level of electronic protection and control of the combustion process.
The combustion chamber of the boiler is made of 5 mm thick special boiler steel (265 GH brand) which is resistant to heat.
With proper operation, boiler maintenance is minimal.
Important: the ash pump is not included with the boiler!!!
B–SMART 15 kW
B–SMART 30 kW
| Nominal power | 15 KW | 30 KW |
| Power range | 5-15 KW | 9-30 KW |
| Temperature range | 60- 80 °C | 60- 80 °C |
| Minimum temperature of the return line | 50 °C | 50 °C |
| Pellet quality A1 | A1,A2 Ø6 Ø8 | A1,A2 Ø6 Ø8 |
| Total weight of the boiler | 225 kg | 245 kg |
| Maximum working pressure | 2,5 bar | 2,5 bar |
| Pellet capacity of the basic storage | 150 dm3 | 230 dm3 |
| Total width of the boiler | 580 mm | 635 mm |
| Total height of the boiler | 1490 mm | 1545 mm |
| Total length of the boiler | 735 mm | 1275 mm |
| Flow / Return (inch) | 1″ | 1″ |
| Fill / Drain tap (inch) | 1/2″ | 1/2″ |
| Flue gas diameter | 80 mm | 120 mm |
| Air inlet opening | 50 mm | 50 mm |
| Flue gas temperature at nominal power | 128 °C | 140 °C |
| Necessary draught | 10 Pa | 10 Pa |
| Boiler water volume | 33 l | 58 l |
| Connection to electrical network | 220 V 50 Hz | 220 V 50 Hz |
| Energy consumption at start-up | 400 W | 400 W |
| Energy consumption at steady-state | 100 W | 100 W |
| Boiler class efficiency | 5 | 5 |
| Boiler class emissions 5 5 | 5 | 5 |